Monitors and Memory

Feature request: two-input vertical (top/bottom) stacked layout in Multi View Model: Samsung Odyssey Ark (55”, S55CG970 / S55BG970) What I’m asking for: Add a Multi View layout that stacks TWO separate HDMI inputs vertically — one source on the top half of the panel, one on the bottom half, each at View Post

I had a different brand widescreen monitor that used Thunderbolt 4, and I switched to this new monitor. The monitor is amazing, but the Thunderbolt 5 connection is not stable, stays connected, but the screen goes black while everything stays connected. If you disconnect it and connect it again, it cView Post

Dear all, I just bought a NVME 990 Pro and set a password for this stuff. However, after update firmware for this NVME, I'm unable to login this NVME to startup window. Could you please advice me what I have to do in this situation? May I contact with Samsung Technical Service to solve this issue?View Post

I've had the Odyssey G80HS (32", 6K) for about three weeks and I'm very happy with it overall — text is razor-sharp at native 6144x3456. There's one intermittent issue I'd like to compare notes on with other owners, and ideally get on Samsung's radar for a firmware fix. My setup: - Odyssey G80HS, naView Post

Model: S27CG552EL Model Code: LS27CG552ELMZD Software Ver.: M-C5500GGZA-1008.3 I am writing to officially report a severe, chronic firmware and timing synchronization issue on my new Samsung Odyssey G5 monitor when attempting to run at 60Hz in its native 2560x1440 (2K) resolution. This issue introduView Post

Samsung ViewFinity S9 (S27C900P) loses connection randomly with Mac Studio M3 Max. Setup: - Mac Studio M3 Max - Two Samsung ViewFinity S9 5K monitors - Both connected directly via Thunderbolt 4 - Original Samsung cables and Apple Thunderbolt 4 cables tested - Latest firmware installed - No sleep modView Post

Hello. The monitor is green/black (and green moving lines) when not conected to any input. Did try the normal trubelshotting (on/off, new cabel). And nothing works. So only asking if somebody have any idea to fix it. If not scrap and replace. Samsung model C32JG58QQU Thanks for any helpView Post

Hello, I'm looking for a mainboard for the Samsung Odyssey Neo G9. The model number for the board is BN41-03169A specifically. I've linked a photo of what the board should say on it.View Post

Model LS49DG954SNXG0. Firmware version 2220. I've noticed that ever since having this monitor, I constantly have a pixel refresh happening, which is total fine. Problem is the pixel shift for keeping the display not getting burn-in goes off screen. Using windows 11, the time in the bottom right cornView Post

Hi I am unable to set 240hz at 5120x1440. When I set the refresh rate in windows it just kicks the resolution down to 3840x1080. I am using a new AMD 9070 XT GPU and a Display Port 1.4 Vesa DSC HBR3 cable. For the life of me i cant figure this out I can only achieve 120hz at max resolution.View Post

I've had this monitor for a couple years now, gifted from a family member who wasn't using it. It works 90% of the time perfectly fine, but occasionally the screen will turn off for a 3 - 10 seconds. Usually if I spam hit the menu button it will turn on eventually. I've tried all of the online troubView Post

I am hoping someone can help me with this. I have gone to the product page and downloaded the new Upgrade MAIN file, put it on USB, and tried upgrading my monitor from 1012 to 2000.2 but my monitor says there is no update available. In the about this monitor in settings my current firmware is showinView Post

Hi, My monitor was purchased new and it was working fine until a few weeks ago that it failed to stay constantly on. I had done reset several times. The monitor stays on for a minute then turn off and keeps on repeating the process. All the buttons are not function during this time. If I unplug the View Post

Hi this is a test post as I keep getting a warning that the message body contains words it does not like even though there are no bad wordsView Post

Hey guys. I got a firmware update on my 34" Samsung Odyssey Oled G8 yesterday. I mainly use it with my PS5 pro. before the update it worked flawlessly, had VRR enabled, 120hz, Adaptive Sync and all goodies. The image was centered of course as PS5 doesn't support UW monitors. Now to the issue. After View Post

I am about a year and a half into owning my Samsung Odyssey G80SD 32" and I've started to experience display issues that I feel might be an instable display port or firmware. Issues: A brief static flash appears in the center, bottom, or right side of the screen. At random, the entire screen goes blView Post

I have owned a Samsung Odyssey OLED G8 G81SF monitor for a few months, and have used it for HDR gaming on PS5 pro and PC. What is the difference between normal and native color spaces? I can see color difference between auto and normal, and between auto and native, but I can´t see difference betweenView Post

I am currently trying to update my Samsung SSD 990 Pro with Heatsink 2TB and two Samsung SSD 990 PRO 2TBs. They are installed directly to my board, an Asus Maximus Hero Z790. Is there some kind of log file or anyway to troubleshoot this issue? My drives are not in RAID mode.View Post

I have the latest Magician version installed (9.0.1) which detects an update for 990 Pro ssd. But it fails to update it regardless of secure boot turned on or off (the recommendation that i saw in similar post) Bootable usb with the same driver version also fails to install. And it acts even more stView Post

Hi! I previously used the Samsung Odyssey G7 G70B (LS28BG702EPXEN), where I was able to enable HDR10+ Gaming at any time. This feature worked both for gaming and everyday use, providing excellent image quality for media consumption as well. I recently upgraded to the Samsung OLED G8 G81SF (LS27FG812View Post