Monitors and Memory

Monitörümde DisplayPort ta bazen açılışlarda, bazen de uygulamalardan çıkarken ekran gidiyor başlangıç smart mavi ekran geliyordu. DP çıkartıp taksam farklı yuvaları denesemde görüntü gelmiyordu. Öncesi seyrek olan bu olay sıklaşmaya başladı, dün ne yaparsam yapayım hiç gelmemeye başladı. Kasa çalışView Post

Hello everyone, I'm writing from France, where I own a Samsung Odyssey OLED G9 G93SD 49-inch monitor (LS49DG934SUXEN), purchased directly from Samsung in November 2024. After less than two years, the rear JOG control button broke off during normal use, without any impact, excessive force or mishandlView Post

So I've been looking around and seeing that my monitor is on MJK-G3027FGSA-1000.4 and the new one from the official Samsung site is MJK-G3027FGSB-1001.1 The only thing that changes is the monitor has the "FGSA" and from Samsung is the "FGSB" would that be the problem for the monitor to not be able tView Post

I was in the market for an Odyssey Neo G9, the $2000 one, but I had questions about Samsung's policy on dead pixels. The AI couldn't help, (go figure) so it connected me to the wrong support branch. After that person connected me to the right one, I had to play a game of mental chess to get across wView Post

All these drives are on my MSI Pro Z790 MB and using MS Storage Controller and Standard NVM Express Controllers. I've uninstalled and reinstalled the latest version 9.0.1 and all drive firmware is up to date. What might be causing this issue? The software worked fine a couple moths back.View Post

Can I utilize a bamboo drawing tablet to give my laptop monitor an upgrade, and would anyone help restore and combine 2 8" tablets tcl and androidView Post

I am reporting a reproducible DisplayPort compatibility issue with the Samsung ViewFinity S9 (S27C900P) and recent NVIDIA drivers. I am requesting that Samsung moderators escalate this issue to the monitor firmware engineering team. My configuration: Monitor: Samsung ViewFinity S9 (S27C900P) FirmwarView Post

Monitor: Samsung Odyssey OLED G8 G80SH, model LS27HG800SWXXL Firmware: 1002.2 Auto Source Switch+: Enabled I am reporting a reproducible input-switching problem that seriously affects everyday use of this premium monitor. Observed behavior: 1. With the PC running, turning on a game console switches View Post

I love the monitor but would like to tilt it down. Either it doesn't or its so stiff that I feel like I would break it if I did.View Post

I am submitting a detailed bug report regarding a reproducible firmware-level DisplayPort handshake failure on the Odyssey Neo G9. This issue has been exhaustively tested and isolated to the monitor's DP Deep Sleep behavior violating VESA wake latency expectations. Standard tier-1 troubleshooting (cView Post

Environment - Monitor: Samsung Odyssey G7 G70B 28", model S28BG700EP, firmware 1720.7 (latest available), Tizen - Input: DisplayPort 1.4, Input Signal Plus enabled for DisplayPort (required for 4K@120/144) - Source: MacBook Pro 14" 2021, Apple M1 Pro (MacBookPro18,3), macOS 27.2 (26B5086k) - ConnectView Post

This happened after having this monitor for 4 days. Any solutions? Thanks.View Post

*Update 9/22/26* I ended up having to call Samsung Tech Support. Spent 35 minutes on the phone with them and I am having to ship the monitor back for repair. 😓 This can be closed out if necessary. Hello all! Hopefully you can help because I feel like I am running around in circles. I purchased the View Post

My Odyssey Ark 2nd Gen (55", LS55CG970NNXGO) updated to firmware 2231.1 (T-OSCPCWWC-0090-2231.1) and immediately after, all four display inputs stopped working — HDMI 1, 2, 3, and DisplayPort. Tested across three separate source devices with different cables, so it's not a cable/source issue. EverytView Post

Hi I have a new 4K Samsung S27H71 monitor and i need it to display the max 3840 x 2160 but it will only display 1920 x 1080 from my laptop. My laptop is capable to send the max high res signal. Geek Squad could not figure it out and I don't know how to get through to any Samsung customer service. WhView Post

Should I install Samsung Magician on all my portable SSDs? If so, where do I get the program, and how do I install it?View Post

Dear Samsung Support Team, I am reaching out to report a critical firmware and scaler issue regarding my new monitor when paired with a modern high end graphics card via DisplayPort The Symptoms 1 Incorrect BIOS Resolution Inside the BIOS the monitor fails to display a proper Full HD resolution InstView Post

I am writing to report a persistent display issue with my Samsung ViewFinity S9 (Model: S27C900P) connected via DisplayPort to an Nvidia RTX 5070 Ti. The monitor fails to work at its native 5K @ 60Hz resolution (black screen / no signal) when using recent Nvidia drivers or operating systems like LinView Post

I’m looking for advice from other Samsung Odyssey owners because I’m getting extremely frustrated trying to get this resolved through Samsung support. I have a 49-inch Samsung Odyssey OLED G9 G93SD that I’ve owned for approximately 10 months. The monitor has been used normally and has not been droppView Post

I have 2 Samsung Monitors, the M80F and Odyssey OLED G8 (G80SD). I had them both starting on the last app when I turn on the monitor, but today my M80F kept opening Samsung TV Plus at the start and this one didn’t or no longer had “Open last open app”. I can’t recall but if it didn’t I had the open View Post