Monitors and Memory

My MacBook displays and charges over the usb-c port on the display and detects the monitor in the audio settings, however I cannot get it to actually play audio when connected via usb-c. When connecting via HDMI audio is functional for my Mac and other devices but I cannot seem to get audio to work View Post

51K

15

6

on

03-28-2022 12:54 PM

Hi, I recently saw this video which give a good demo of Samsung's M7 Monitor that was actually Sponsored by Samsung: https://youtu.be/qGs9H2cd-sI I noticed at at 6:50 in the video it demonstrates plugging in a wireless USB keyboard dongle into the monitor and then plugging in a laptop via USB-C and View Post

30K

3

1

Auto Source switch not works, tested with new firmware and issue continues. I have one computer connected through Display Port and another with HDMI. Auto Source is ON, but I have to select manually the source when I change from one computer to another. Tested in many ways, none works. Please, solveView Post

35K

11

9

on

03-30-2022 07:51 AM

Hi there, I just installed a new samsung SSD 970 evo plus 1TB. It works properly. However, when I check it with Samsung magician, there are several issues. 1. No drive health and temperature detected. Showed as N/A. 2. It cannot recognize by diagnostic scan, 3, It cannot apply the performence optimiView Post

33K

1

3

on

10-24-2020 06:28 PM

Is this display not supposed to light up? I clearly saw the display model in the store with RGB on the back and the two little slits on the front, but mine does not do that. How does one turn this on and off? I just spent 30 min chatting with Samsung support just to have them tell me "AMD Radeon setView Post

36K

3

1

on

04-7-2022 01:57 PM

Hi Asteroid, I had a similar problem to you and tried all the suggestions on this site to no avail. My BIOS also has the drive seen as in AHCI mode. I diagnosed that the problem MAY have started after I set my original Magician v5.5(which was working) to Rapid mode, I also used 'Overprovisioning' toView Post

10K

2

0

on

07-13-2020 09:32 PM

Hey, Bought a 970EVO and doing some pre-deployment testing of iEEE1667 encryption. I am also having bad luck with our Intel 7600p drives doing this - another story. Anyway, I have the drive installed on a PC with nvme slot and Magician 5.2 is telling me it is not supported. Anyone else got the 970EVView Post

100K

8

2

on

01-19-2020 08:39 PM