Original topic:

Updated Android and Lost Network Connection/SIM Card Detection

(Post creation time:  

10 months ago

)

4058 Views

S

Sketchbig

Asteroid

last edited

 

10 months ago

 

in

 
I updated my phone a couple of days ago and now I have no network connection. On reboot I get a message that says my SIM is not supported. Spent hours talking to my carrier, got multiple eSIMs, and still nothing. Anyone else have this issue and if so, have you found a solution? My phone is a S25+ and I have been using it without issue since June 2025.
    • M

      meself

      Honored Contributor

      10 months ago

       

      in

       
      Not had that issue

      0 likes

    • M

      MarvinMod2

      Red Giant

      10 months ago

       

      in

       
      Have you reached out to Samsung tech support? May have to have it reflashed. I would try a factory reset first but if that dont work and If your tech savvy, xda has instructions on how to do it yourself but it may also not fix your issue or make it worse. However, usually a reflash would fix the issue as this is a sign of a corrupted update. You'll need to send it to Samsung and have them do it for you or if you know what your doing..... 🖖🏻

      0 likes

      S

      Sketchbig

      Asteroid

      10 months ago

       

      in

       
      I have not. I was hoping for a patch update, but no such luck. I will give your suggeations and shot. Thanks.
      M

      MarvinMod2

      Red Giant

      10 months ago

       

      in

       
      Keeps us posted and good luck 🖖🏻
    • S

      SamsungMod

      Community Manager

      10 months ago

       

      in

       

      Hello Sketchbig, welcome to the Samsung Community! I understand your frustrations with your SIM card not working correctly with your device. Most issues with your SIM card will need to be resolved by your carrier. Before you contact them, there are a couple of things you can try first, like checking the SIM card for damage or swapping it with one from another phone.

      Remove the SIM card and inspect it for damage or corrosion. Reinsert the SIM card, making sure it is properly installed in the tray.

      On most models, the SIM card should be placed on the tray with the gold-colored contact facing upwards. If you insert the tray into the slot while the SIM card is placed improperly, the SIM card may not be recognized.

      You can check out our guide to make sure you are removing and inserting the SIM card correctly.

      If you have another active line with your carrier, you can try that SIM card with your device.

      If your SIM card continues to have issues, you will need to get a replacement SIM card from your carrier. You can also try contacting your carrier if you continue to have issues with the SIM card.

      If you have verified that your SIM is working and active, your device requires service. Please visit a Samsung walk-in service center or you can schedule a repair service online.

      S

      Sketchbig

      Asteroid

      10 months ago

       

      in

       
      Thank you. I tried those suggestions and did not have success. I scheduled a service request this morning.

      0 likes

    • R

      Rafelito85

      Asteroid

      10 months ago

       

      in

       
      I'm having the same issue with my S24 Ultra.. there is a glitch in the new security patch update and has to be reflashed and back to the previous update.
      S

      Sketchbig

      Asteroid

      10 months ago

       

      in

       
      Did the reflash cause any issues?

      0 likes

      R

      Rafelito85

      Asteroid

      9 months ago

       

      in

       
      I did flash it using the Odin system and method, putting only the CP driver in the system and it worked.
      D

      djavs

      Asteroid

      6 months ago

       

      in

       

      can you please let me know how i reflash it on my s23 ultra (uk) please.  my network keeps jump on and off no issue with sim card or network provider but since update this issue keeps occurring

      0 likes

    • N

      NurseK

      Constellation

      10 months ago

       

      in

       
      Having same issue with S24+. Fine before update; bricked after. Spent 6 hours between phone verizon tech, Samsung tech and in store Verizon tech. Nothing worked. They recommend factory reset but I'm going to try to reflash first. So frustrating.
    • U

      userUkgAEbyuYo

      Constellation

      9 months ago

       

      in

       
      Has anyone fixed the issue

      0 likes

    • R

      Rafelito85

      Asteroid

      9 months ago

       

      in

       
      These are the instructions I used..

      Hello, The issue you are experiencing is because of a glitch caused by Samsung's latest software update. Good news — we’ve identified a faster and safer fix for Samsung devices affected by the recent software update. In most cases, the device can be re-unlocked by flashing only the modem (CP) file using Samsung’s official ODIN tool. -We would highly recommend backing up your phone first using Samsung Smartswitch, which should be preloaded on the phone. You can also download a PC version of Smartswitch. ✅ No data loss (when steps are followed correctly) ✅ Phone works immediately after ✅ Current security update remains intact ⚠️ IMPORTANT – READ BEFORE STARTING You MUST remove your phone’s passcode / PIN / pattern / fingerprint / face lock before flashing the CP file. If a passcode remains on the device, the phone may force a factory reset after flashing. You may re-enable your passcode once the process is complete. After the Fix: Prevent Future Relocking (Recommended) To help prevent this issue from occurring again, we strongly recommend disabling automatic system update downloads on your device. Steps: -Go to Settings -Tap Software Update -Switch Auto download to Never This does not prevent you from updating manually in the future — it simply ensures updates do not install automatically without your approval. Summary of Steps -Backup your phone -Remove your screen lock / passcode -Download ODIN and the provided CP file -Put your phone into Download Mode -Open ODIN and connect your phone -Load ONLY the CP file -Click START and wait for PASS -Turn Auto Download Off Once the phone restarts, it should be unlocked and fully functional immediately, with all data preserved.

      You have to download Odin (lastest version)
      You have to download the files from Samfw.com
      D

      djavs

      Asteroid

      6 months ago

       

      in

       

      hey bro

      how do i find the right firmware BIT (BINARY/U/SW REV. as here is my version of the phone uk one

      s23 ultra - below in picture but know it Rev version i need for uk phone

      images of my phone 

      https://ibb.co/mrzBz1Xf 
      https://ibb.co/JWMmpv1Z 

      0 likes

      D

      djavs

      Asteroid

      6 months ago

       

      in

       

      bro can you look at my post below

      0 likes

      R

      Rafelito85

      Asteroid

      6 months ago

       

      in

       
      To find the right firmware, you have to go on Odin and there is a button that you press (sorry forgot which one) that will tell you the firmware you're one. Once you know, you go back and check the version of it from months prior to the update that messed up your phone.

      0 likes

    • S

      Sketchbig

      Asteroid

      9 months ago

       

      in

       
      After 6-8 hours talking to support, sending phone to samsung and getting it back. I've had to tranfer my service back to my old s10e because it still works. After the samsung repair shop had it(they sent it back without the SIM tray), it worked for mobile network data but still wouldn't connect for calls and texts. I'm going to have to send it back again. Hopefully it gets resolved. It has been a very frustrating experience.

      0 likes

    • S

      Sketchbig

      Asteroid

      7 months ago

       

      in

       
      Just got my phone back for the third and final time. I asked for a replacement because my warranty is almost up, so they claimed water damage this time and that they would have to charge me. Phone has never been near water and the only thing that doesnt work is the basics of connecting to a network for talk and SMS. Looks like I'm going diy and staying out of the samasung eco system from now on. This has been a big disappointment. Thanks for all the comments and feedback. I hope you guys find a solution this problem.