Original topic:

Bluetooth calls bouncing between connected devices

(Post creation time:  

2 years ago

)

10859 Views

B

BayouBoy3

Nebula

last edited

 

2 years ago

 

in

 

When I have 2 Bluetooth devices connected (smart watch, earbuds) and I'm on a call the Bluetooth keeps jumping from the device I've chosen to talk on to the other. How do I stop this from happening or is there a way? Thanks

    •  

      Selected Answer

      N

      nofuncreep

      Constellation

      2 years ago

       

      in

       
      Try in the Bluetooth connected devices and set one for the media and the other for phone calls,in case u haven't tried that yet

      This comment was created from this

      reply

      0 likes

    • R

      realaud

      Honored Contributor

      2 years ago

       

      in

       

      It should not happen.  It should stay connected to the device it was connected to first.  Have you cleared the cache partitions from both the phone and the watch?

      Clear watch cache.JPG

       

       

       

       

       

       

      1. Power off your phone. Hold Power and vol up buttons until Samsung Logo appears

      2. Let go of both buttons when you see the Samsung Logo appear on screen. There will be a delay while it enters recovery mode.

      3. Use the volume buttons to navigate through recovery menu options and highlight “Wipe Cache Partition.” Press power button to select this option . Confirm by navigating to the yes response and tapping the power button to select.

      5. When wiping cache partition is complete, "reboot system now" should be highlighted; press power key to select it . The phone will reboot as normal.

      0 likes

    • B

      BayouBoy3

      Nebula

      2 years ago

       

      in

       
      Okay that may be the problem is that it keeps trying to cycle bk to my watch that's always connected. So that's the device it was connected to 1st. Thanks

      0 likes

      N

      nofuncreep

      Constellation

      2 years ago

       

      in

       
      Try in the Bluetooth connected devices and set one for the media and the other for phone calls,in case u haven't tried that yet

      0 likes

      R

      realaud

      Honored Contributor

      2 years ago

       

      in

       

      That was not his issue.  His issue is that the ear buds jump between using the phone feature on his watch and the phone while connected to a call. Not that it was jumping from one device to play media and the other for the call.

      0 likes

      B

      BayouBoy3

      Nebula

      2 years ago

       

      in

       
      And that was the issue. I had forgot all about that.

      0 likes

    • R

      realaud

      Honored Contributor

      2 years ago

       

      in

       

      Alternatively, even though it's a bit more inconvenient, you can try this.  Since some BT ear gear can be connected to two devices at the same time, if they are paired with both, they will connect to both when turned on.  In this case, when you put in your buds intending to use them on one device only, you can go to the other device and disconnect the buds.  They will remain connected to the device you chose.  Even if connected to two devices, the call should stay with the device you answered on, not jump from one to the other during a call. Unless you answered by tapping the buds themselves, in which case, I'm not sure it knows which device to answer on or stay with if connected to both.

      0 likes

    • R

      RobXbalboa

      Red Giant

      2 years ago

       

      in

       
      Every time I turn on my car it takes over my bluetooth even with a BT earpiece in. Hate to have to switch it back everytime
      R

      RobXbalboa

      Red Giant

      2 years ago

       

      in

       
      Okay when I get in the car while on a call the cars bluetooth takes over still BUT if I wait about 20 secs it does go back to the earpiece. So thats a yes a da thank you

      0 likes

      R

      realaud

      Honored Contributor

      2 years ago

       

      in

       
      I guess it actually has to connect before it can disconnect. Probably won't even notice it take effect if you are not on a call when you get in the car.

      0 likes

      R

      RobXbalboa

      Red Giant

      2 years ago

       

      in

       
      My thoughts exactly but it does the job. Trying to switch back manually is a nightmare. Thanks my man 🙏

      0 likes

    • B

      BayouBoy3

      Nebula

      2 years ago

       

      in

       
      Bless you all for the help. Thank you so much.

      0 likes

      R

      realaud

      Honored Contributor

      2 years ago

       

      in

       

      Please mark whichever response helped you as the solution so others who may have the same problem can find it.

      0 likes

      B

      BayouBoy3

      Nebula

      2 years ago

       

      in

       
      It's been marked since this morning as RESOLVED.

      0 likes

      R

      realaud

      Honored Contributor

      2 years ago

       

      in

       

      Didn't see it, sorry.

      0 likes

    • D

      1 year ago

       

      in

       
      None of this constitutes a resolution. It is idiotic that the phone would interrupt a bluetooth call in progress and connect to a newly discovered Bluetooth device. I was hoping that Android 15 would contain a fix for this, but apparently not. 🙄

      0 likes

      D

      1 year ago

       

      in

       
      No there is not. I am not going to leave the car outside in the weather just for this. Based on my experience with our phones' range, I'd have to park it half a block away. The easier workaround would be to just turn the car Bluetooth off, but that would then require that my wife knows how to turn it on when she wants it. That's probably what we'll end up doing.

      0 likes

      R

      realaud

      Honored Contributor

      1 year ago

       

      in

       
      Do you think she's not smart enough to figure it out?

      0 likes

      D

      1 year ago

       

      in

       
      Like most folks she's not good at remembering sequences of steps she doesn't perform often. But we're getting far away from the subject here, which is why we can't have a simple option to prevent Bluetooth connections from switching devices when already engaged with a device.

      0 likes