Original topic:
Detergent Automatic Dispenser Filled WIth Water
(Post creation time:
04-23-2026 09:15 PM
)
2748 Views
I have a Bespoke washing machine WF90F53ADSA5. The detergent auto dispenser is getting filled with water as it dispenses the detergent. The detergent dispenser never get empty it only soak the detergent... as far a i knkw it supposed to tell me its empty or low. But level never goes down because it gets filled with water
Selected Answer
Samsung_Moderator
Community Manager
04-24-2026 02:23 PM
in
Hey, Jemrey, I understand how frustrating this must be. Thank you for taking the time to share with us how your Bespoke washer is having issues with the dispenser. While it is normal for a small amount of water to flush the dispenser to ensure all detergent enters the drum, it should not remain full of water or dilute your detergent to the point where the "low level" sensor never triggers.
To help resolve this concern, take a look at the troubleshooting steps below. It goes over how to clean the dispenser, to level the washer, and a service repair, which would be the last resort. If you have further questions, please feel free to send us a private message by clicking on one of the moderators' profiles and clicking on "Send direct message." Thank you for being a part of the Samsung Community.
https://www.samsung.com/us/support/troubleshoot/TSG10002916/
0 likes
AAbbott
Honored Contributor
04-23-2026 10:56 PM
in
My experience with any brand's automatic detergent dispenser is that water fills it up in order to push the detergent into the washer. If it's not pushing the detergent out, that's a different thing. Are you using powder or liquid? I believe these dispensers are meant more for liquid detergent than powder, as powder is likely to clump and cake. My personal preference is to bypass the dispenser entirely and put the detergent directly into the machine, either on the bottom before the laundry goes in, or over the top before or after the washer fills.
0 likes
Samsung_Moderator
Community Manager
04-24-2026 02:23 PM
in
Hey, Jemrey, I understand how frustrating this must be. Thank you for taking the time to share with us how your Bespoke washer is having issues with the dispenser. While it is normal for a small amount of water to flush the dispenser to ensure all detergent enters the drum, it should not remain full of water or dilute your detergent to the point where the "low level" sensor never triggers.
To help resolve this concern, take a look at the troubleshooting steps below. It goes over how to clean the dispenser, to level the washer, and a service repair, which would be the last resort. If you have further questions, please feel free to send us a private message by clicking on one of the moderators' profiles and clicking on "Send direct message." Thank you for being a part of the Samsung Community.
https://www.samsung.com/us/support/troubleshoot/TSG10002916/