I read on Google you cannot because it is soldered, but you could upgrade the RAM to improve the performance. A DDR3 memory up to 8gb can be supported.
You're welcome did it come out in 2012? I read something about putting it in legacy mode and then it got really confusing and mentioned it could be unsafe to do so, so good luck.
Yes I t stuck UEFI Mode if I put a hard drive in and that has UEFI mode on it I can get into bois but hitting restart with my finger on the swift key the go to advance then to UEFI and it will let me go to Bios and change it but then when restart it is back into the UEFI mode again does not save the setting
it is nice as long as you have windows 10 with UFEI hard drive in it
Selected Answer
mermaidcaviar
Supernova
06-30-2024 11:42 PM
in
tj8799
Asteroid
07-1-2024 01:44 AM
in
Great oh well I was selling it anyway as it keeps getting stuck in the UFEI mode and when I change it goes back
Thank you for the help and Information
Todd
mermaidcaviar
Supernova
07-1-2024 02:45 AM
in
0 likes
tj8799
Asteroid
07-6-2024 03:44 AM
in
Yes I t stuck UEFI Mode if I put a hard drive in and that has UEFI mode on it I can get into bois but hitting restart with my finger on the swift key the go to advance then to UEFI and it will let me go to Bios and change it but then when restart it is back into the UEFI mode again does not save the setting
it is nice as long as you have windows 10 with UFEI hard drive in it
Thank you
Todd
0 likes
tj8799
Asteroid
07-7-2024 01:21 AM
in
actually looking at the tag says it is October 2012 model
Thank you
Todd
0 likes
tj8799
Asteroid
07-7-2024 01:40 AM
in
here is the specs
0 likes