Original topic:
Modes and Routine with Wifi Condition
(Post creation time:
08-24-2026 07:25 PM
)
254 Views
C
calculon
Asteroid
I've had an ongoing issue with Modes and Routines when using the Wifi Network condition. It often stops detecting connectivity.
Example:
- Phone is connected to Wi-Fi, home network "HOME123"
- M&R is set with IF > WIFI NETWORK > CONNECTED TO HOME123 (or DISCONNECTED FROM HOME123)
- M&R won't pick up the desired state. Right now, I'm connected to HOME123 but M&R does not have CONNECTED checked, instead for an automation where I'm DISCONNECTED, it is checked.
- This happens regardless of "Check network name only" is ticked or not.
- Turning on and Wifi or Airplane Mode does not kick start M&R
- If I FORCE STOP M&R it works as expected until the next time.
- No consistency when the condition fails (as far as I can tell, it's random)
- Wifi connection uses default Randomized MAC Address Type.
It's unclear to me what causes the condition to fail. These are automations I've had prior to the beta that I've run for years.
I've checked various permissions and can't narrow down if it's user error or M&R at this point.
The ONLY difference outside of the phone is the upgrade to a faster modem with Wifi7. Which the phone regularly connects to on a very strong Wi-Fi 7 band.
This leads me to Intelligent Wifi & Convectively Labs, which I haven't touched and it's unclear what would work.
Before tweaking these settings, is M&R the culprit? I can handle some FORCE STOP's until the stable release.
Thank you for attending my TED Talk.
0 likes
SuchWow
Cosmic Ray
08-25-2026 07:59 AM
in
Also, did you setup the mode and routine from scratch again after getting the new router? Could also be as simple as that.
calculon
Asteroid
08-25-2026 06:48 PM
in
Rebuilding was my first instinct, I failed to mention it, but l rebuilt it around beta 4. I think I got into the beta around 3 or 4.
0 likes
calculon
Asteroid
08-25-2026 07:06 PM
in
0 likes
USBetaModerator3
Beta Moderator
08-25-2026 05:26 PM
in
Hello,
Thank you for providing the detailed description and reproduction conditions.
Additional analysis may be required to determine whether the behavior is related to Modes and Routines, Wi-Fi connectivity detection, or another network-related condition.
If the issue occurs again, please submit an Error Report while the incorrect Modes and Routines condition is still present, before force stopping the app if possible.
When submitting the report, please include:
- The Wi-Fi network condition configured in the Routine
- Whether the device is actually connected or disconnected from that network at the time
- Whether “Check network name only” is enabled
- Approximate time the condition failed to update
- Whether Wi-Fi or Airplane Mode toggling changed the behavior
- Whether force stopping Modes and Routines temporarily restored normal operation
- Router / Wi-Fi configuration details, including Wi-Fi 7 if applicable
Please open Samsung Members → One UI Beta Program → Beta Feedback → Error reports, attach any relevant screenshots or screen recordings, and make sure “Send system log data” is enabled.
For accurate analysis, please submit the report as soon as possible after reproducing the issue and keep Samsung Members running until the log upload is completed.
We appreciate the detailed testing and your continued participation in the One UI Beta Program.
Best regards,
One UI Beta Team
calculon
Asteroid
08-25-2026 06:49 PM
in
0 likes
calculon
Asteroid
08-25-2026 07:06 PM
in
0 likes
calculon
Asteroid
08-28-2026 06:49 PM
in
0 likes