‎Problems getting Windows to format new SSD

B

Brassovitski

Student

last edited

23/11/2022 03:27 PM

Hi
I have 2 disks in my PC, a Samsung EVO SSD (Boot/System), and a regular WD HD (1 TB).
The machine runs Windows 10 fully updated.
I have then bought a new Samsung 870 QVO of 2 TB, which is to replace the WD disk, I connect this to the machine via a Sandberg SATA - USB connector.
Disk Management finds the disk, but I can't get permission to initialize / format it. Is there a trick so I can get hold of the disk?
Please watch this video:
https://www.dropbox.com/s/et8kvdlbver3brx/Samsung%20870%20QVO.mp4?dl=0

Samsung Magician results:

https://www.dropbox.com/s/0sbbn8axvm8npiw/Samsung%20870%20QVO%20i%20Magician.pdf?dl=0

Hope the link works. 🙂

0 likes

Solution
J
JakeSully
Hotshot
last edited

23/11/2022 08:46 PM
Could be a issue with your SATA to USB adapter. Seen it happen before, it makes drive appear but that's all it does it prevents you from formating it and so on. Try using another adapter and see if issue remains
0 likes
B
Brassovitski
Student
last edited

28/11/2022 07:19 PM
JakeSully

Exactly. It was exactly the adapter that is apparently not compatible with a QVO SSD, or a disk larger than 1 TB. I installed the new SSD (2 TB) in the computer, Windows found it immediately and I was able to initialize and format the drive, then I connected the old WD 1 TB via the adapter cable and cloned the old drive onto the SSD and it works perfectly fine now
0 likes

Problems getting Windows to format new SSD

Related Content