title:

Screen touch not working

(Post creation time:  

4 months ago

)

356 Views

_

_h_4r5_h_

Beginner Level 2

last edited

 

4 months ago

 

in

 

​Hi Everyone,

​I recently purchased a new Samsung Galaxy M56 5G, but I am facing a persistent touch screen freeze issue.

​Issue Details:

  • ​The screen touch becomes completely unresponsive randomly or immediately after ending a call.
  • ​Proximity Sensor Behavior: During a call, the screen turns off as expected, but after removing the phone from my ear, the screen touch freezes completely.
  • ​Physical Features: When frozen, double-tap to wake/sleep does not work, and the fingerprint scanner fails to respond. However, Face Unlock and the ambient light sensor continue to work properly.
  • ​Current Temporary Fix: The touch only starts working again after doing a forced restart (holding Volume Down + Power button for 10-15 seconds).

​Troubleshooting Steps I've Already Tried:

  1. ​Disabled Accidental Touch Protection.
  2. ​Enabled Touch Sensitivity.
  3. ​Cleared sensor area and checked screen guard alignment.
  4. ​Checked for Software Updates (currently showing no new updates available).

​The issue seems to be a major OS/Software UI glitch or a driver freeze related to the proximity/touch sensor.

​Is anyone else experiencing this on their M56 or receiving a patch update for this bug? Any insights or official solutions from moderators would be greatly appreciated!

​Thanks.

    • D

      Dr_Samsung

      Active Level 6

      4 months ago

       

      in

       
      Hi there,
      ​This definitely sounds like a very frustrating issue, especially on a brand-new device like the M56 5G. Since you've already done a great job troubleshooting the basic settings (touch sensitivity, accidental touch protection, and updates), it does seem like a deeper system UI conflict or a hardware-level sensor glitch.
      ​Here are a few advanced troubleshooting steps you can try to isolate and potentially fix the issue:
      ​1. Boot into Safe Mode
      This will help determine if a third-party app (like a custom dialer, truecaller, screen dimmer, or battery saver) is interfering with the proximity sensor or UI.
      ​Press and hold the Power button to bring up the power menu.
      ​Touch and hold the Power off icon on the screen until the Safe mode prompt appears.
      ​Tap Safe mode to restart.
      ​Test: Make a few calls in Safe Mode. If the screen doesn't freeze, a downloaded app is causing the conflict. You will need to uninstall third-party apps one by one to find the culprit.
      ​2. Wipe the Cache Partition
      Sometimes, temporary system files can get corrupted and cause touch drivers to freeze. This process will not delete your personal data (photos, contacts, etc.).
      ​Turn off the phone completely.
      ​Connect the phone to a PC/Laptop via a USB cable (newer Samsung models often require this to enter recovery mode).
      ​Press and hold the Volume Up + Power button simultaneously.
      ​Release the buttons when the Android Recovery screen appears.
      ​Use the Volume Down button to highlight Wipe cache partition and press the Power button to select it.
      ​Confirm by selecting Yes, and once done, select Reboot system now.
      ​3. Run Hardware Diagnostics
      You can check if the proximity sensor is physically failing to register the "release" state properly.
      ​Open the Samsung Members app.
      ​Go to Support > Phone diagnostics.
      ​Test both the Touch screen and the Proximity recognition. If the sensor fails the diagnostic test, it is a hardware defect.
      ​4. Reset All Settings
      If a system-level configuration is causing the freeze, resetting the settings can clear it without wiping your apps or media.
      ​Go to Settings > General management > Reset > Reset all settings.
      ​Tap Reset settings to confirm.
      ​Final Recommendation:
      Since this is a newly purchased device, if the issue persists after wiping the cache partition and testing in Safe Mode, it is highly recommended to visit a Samsung Authorized Service Center immediately. Do not wait for a patch update, as you might still be within the official replacement window if it turns out to be a defective motherboard or hardware sensor.
      ​Hope this helps you get it sorted out!

      If it helps you, please click "accept solution" button.

      0 likes

    • C

      cs_member10

      Moderator

      4 months ago

       

      in

       

      Dear Samsung Member,

      Greetings from Samsung Customer Support!

      As per your query, we request you kindly share the log file. Also, share video clips and images for better understanding. This will help us to investigate further and resolve this issue.

      Samsung Members Application (Open Samsung Members Application > Support> Tap on send feedback> Choose Composer> Select error report> select the appropriate issue category> Type your query and send.)

      Note: To ensure relevant log information is included in the error report, submit the report within 3 minutes of encountering the bug or error, and do not terminate (swipe away) the Samsung Members application until you are notified that the report has been sent. This can take up to 5 minutes.

      Warm Regards,
      Samsung Customer Support

      0 likes

    • A

      anandkumar22

      Active Level 4

      4 months ago

       

      in

       
      Yeh it happens to meet too

      0 likes

    • I

      imransharder

      Beginner Level 2

      4 months ago

       

      in

       
      Proximity

      0 likes

    • J

      jashwanths

      Active Level 3

      3 months ago

       

      in

       
      It only happened after one like 8.5 update.

      0 likes