title:

Rollback to One UI 7

(Post creation time:  

10-20-2025 12:11 PM

)

331 Views

R

RedBullRussia

Expert Level 3

last edited

 

10-20-2025 12:11 PM

 

in

 
M34 is currently on One UI 8 

How to rollback to One UI 7 ?

Pls guide 
    • D

      D172

      Active Level 6

      10-20-2025 12:15 PM

       

      in

       
      Well, Officially you can't. If you do it, unofficially it will break the policies of Samsung's use of software, so in between the process of rollback or after that, the Samsung service centre won't touch your phone.
      So my advice, is don't do that.

      0 likes

    • M

      MelkiSR

      Active Level 6

      10-20-2025 12:22 PM

       

      in

       
      It's currently available in korea
      R

      RedBullRussia

      Expert Level 3

      10-20-2025 12:34 PM

       

      in

       
      What is currently available in Korea?

      0 likes

    • S

      sooooooooooooooo1

      Active Level 1

      10-20-2025 12:33 PM

       

      in

       
      If your issue is related to the network, rolling back to One UI 8 won’t help — I’ve already tried installing One UI 7 and 6, and the same network issue persists. I’m starting to believe it’s a permanent problem that Samsung may not fix.

      However, if you still want to give it a try, here’s how you can roll back or reinstall the firmware using Odin:

      ⚙️ Requirements:

      A Windows PC

      Odin software

      Samsung USB drivers (install them on your PC)

      The correct firmware for your exact device model and region
      ⚠️ Be very careful — installing the wrong firmware can brick your phone. (You can download from samfw.com)


      🧩 Steps:

      1. Download Odin and extract it.


      2. Download your firmware (make sure it matches your model and region).


      3. Extract the downloaded firmware ZIP file.


      4. Turn off your phone and boot it into Download Mode

      (Press Volume Up + Volume Down together, then connect the phone to your PC via USB.)



      5. Open Odin on your PC.(run as administrator)


      6. You’ll see tabs labeled BL, AP, CP, and CSC in Odin.

      Load the corresponding firmware files into each tab.

      Important: Use CSC, not HOME_CSC (this ensures a clean installation).



      7. Once everything is set, click Start.


      8. Wait for the process to complete — your phone will reboot automatically.

      Let me know if it helped. Or rhe issue is still there.

      0 likes

    • Z

      Zeegee

      Beginner Level 3

      10-21-2025 05:01 PM

       

      in

       
      Worst One Ui 8

      0 likes

    Related Content

    One UI 6 Rollback

    Rollback to ui 4

    Rollback one UI update

    RollBack