title:

Fingerprint sensor is not working

(Post creation time:  

08-14-2024 07:05 AM

)

671 Views

P

priyarinta

Beginner Level 2

last edited

 

08-14-2024 07:05 AM

 

in

 
I am writing to express my concern and dissatisfaction regarding an issue with the fingerprint sensor on my galaxy A22 mobile phone.

Since may 2024 the fingerprint sensor has not been functioning . This has severely affected my ability to use the phone efficiently, particularly in terms of security and ease of access.

Here are the details of my phone:
Model Name: SM A226b

I kindly request that you address this issue at your earliest convenience. If required, I am willing to bring the phone to the nearest authorized service center or follow any further instructions provided by your team.
    • G

      goodthings

      Expert Level 5

      08-14-2024 07:24 AM

       

      in

       
      Kindly reset factory data with backup then try to it's again. If not resolves then go to service center for resolves this issue. If you like please accept as a solution it's help to others users also, click on 3dots in my reply section and click on accept solution. Thanks.

      0 likes

    • G

      goodthings

      Expert Level 5

      08-14-2024 07:24 AM

       

      in

       
      Your's most welcome to here.

      0 likes

    • A

      Abi__18

      Active Level 7

      08-14-2024 10:35 AM

       

      in

       
      Try restarting

      0 likes

      P

      priyarinta

      Beginner Level 2

      08-14-2024 10:58 AM

       

      in

       
      I did that

      0 likes

    • C

      cs_member10

      Moderator

      08-14-2024 01:13 PM

       

      in

       

      Dear Samsung Customer,

      Greetings from Samsung Customer Support!

      As per your query, we would request you to kindly perform the following steps to resolve your issue.

      Fingerprint sensor not working
      If your fingerprints fail to unlock the phone, and you are asked to type in the lock screen password, follow the steps to resolve the problem:

      Have you check your fingers:
      Ensure that your fingers are clean and dry.
      Note:
      1: If the skin on your fingertips is peeling or cracking, or your fingerprint is difficult to capture, the fingerprint ID on your phone may not work.
      2: If your fingerprints fail to unlock the phone while the phone is recharging, remove it from the charger and try again. If you are charging the phone with a charger and data cable from other brands when you use fingerprints to unlock the phone, they may interfere with the fingerprint sensor and cause the recognition to fail.

      Clean the fingerprint sensor:
      Clean the fingerprint sensor with a soft cloth. Make sure the fingerprint sensor is dry and free from any debris that may cause the sensor to be unable to recognize fingerprint.

      Remove the Screen Guard /Screen Protector:
      Samsung cannot guarantee compatibility with third-party products, as the thickness and structure of protective films or screen protectors may affect the performance of the fingerprint sensor. So if you are using third-party Screen Guard /Screen Protector remove it and try re-registering the fingerprint again.

      Remove fingerprint and set up fingerprint again:
      Remove the current fingerprint and set up fingerprint again. When you touch the sensor to set up fingerprint, make sure you set the entire fingerprint, including the outer area of your fingertip. Setting the entire fingerprint area enables successful fingerprint recognition with any grip.

      Please follow the below steps:
      How to remove Fingerprint:
      Navigate to apps screen and tap on Settings>>Tap on Biometrics and Security>>
      Tap on Fingerprints>>Tap on Fingerprint1>>Tap on Remove>>Tap on Remove again to confirm.

      How to Set up Fingerprint:
      Navigate to apps screen and tap on Settings>>Tap on Biometrics and Security>> Tap on Fingerprints>>Tap on Add Fingerprint>>Scan your fingerprint>>Place your finger on the sensor, then lift it off when you feel a vibration>>Tap on Continue>> Reposition your finger each time to capture the edge of your fingerprint>>Tap on Done>>Fingerprint added successfully.

      Update device software (If Software update available): https://www.samsung.com/in/support/mobile-devices/samsung-galaxy-smartphone-how-to-update-software/

      You can reset your device by following the steps.
      1. Kindly create a data backup of your device via the SMART switch mobile application or http://www.samsung.com/in/support/smartswitch pc suite.
      2. Remember the Google password before resetting the device because it is required during initial setup.
      3. If you do not remember then advise to reset (Forgot password) his/her Google account.

      Path: Settings> General Management.>Reset>Temporary cloud backup or External storage backup>After backup tab on Factory data reset to reset your device to its factory default settings.
      This will erase all data, including files and downloaded apps.

      In case the issue still occurs, please visit the service center for a physical inspection of your device. You can locate your nearest service center with this given link: https://www.samsung.com/in/support/service-center/

      Warm Regards,
      Samsung Customer Support.

      0 likes